Dental implants

What are dental implants?

Filling the gaps of teeth that have decayed or any other damage has become very important today. There are common methods of dental implants (comdental implants) instead of missing teeth, each of which is selected according to the patient’s condition or other conditions such as costs.

In this article, you will get acquainted with the following topics:

• Familiarity with dental implant methods
• A new method of implanting teeth with implants
• Bridge implantation
• The latest dental implant technology
• Dental implants without implants
• Put the veneer in the tooth implant
• Tooth implant with glue
• Costs related to dental implants
• The cost of dental implants

Tooth implant film

Familiarity with the methods of implanting fallen teeth

We all know that dental care can be very effective in maintaining beauty. To take care of your teeth, in addition to maintaining good oral hygiene, it is necessary to use a healthy diet.

But with all the advice in this area about using toothbrushes and floss, as well as not using certain foods, most adults in the community suffer from toothache or tooth loss and need dental implants.

In addition to poor oral hygiene, things like food acidity, gnashing of teeth, participation in sports, genetic causes, smoking, and the use of caffeinated foods can all contribute to tooth loss.

In addition, the lack of annual dental examinations, hypertension, diabetes and gum and mouth diseases can affect the need for dental implants.

Tooth loss, in addition to being aesthetically disgusting, can cause problems with eating or talking. Dental implants eliminate these problems and prevent the loss of remaining healthy teeth, as well as preventing gum disease at the site of tooth loss.

Today, due to the need that has arisen in the field of dental implants, dentists do this using common methods. Among the most widely used methods for filling dental cavities are the use of single dentures, bridges and implants.

A new method of implanting mill teeth with implants

The latest dental implant technology is implants. When a tooth decays, its root usually disappears. In such a situation where the root is destroyed, there is nothing to hold the new tooth in place.

Therefore, there is a need for a retaining base in dental implants. Implants do this in dental implants. Implants are usually made of titanium in the form of a screw that attaches to the jawbone and acts like a root.

When the implant is placed on the jawbone, it merges with the jawbone after a while and a bond is established between the two. For this reason, the implant, like the root, holds the tooth in place and makes the implant possible.

Implants usually have a long life and can be used for a long time with good oral hygiene. It is natural that in case of trauma, poor dental hygiene or gum disease, the implant will be damaged like a natural tooth.

So it is very important to observe these points. In implant implantation, the tooth is first placed in the jawbone and after 3 to 6 months, when the implant is attached to the bone, the tooth crown is placed on it.

 

Bridge implantation

Another method used in dental implants is to use bridges or veneers. Dental bridges are usually made of ceramic, copper or a combination of both.

Types of dental bridges can be divided into metal veneer, FPM veneer, ceramic veneer and zirconium veneer, each of which is used according to the dental implant conditions.

A dental bridge is a denture that is fixed in place with the help of teeth on both sides.

It can be used as long as the side teeth are healthy and have the power to hold the bridged tooth in place, but if any of the side teeth are damaged, the bridge method should be replaced with other dental implants such as implants. To do this, the dentist first prepares the side teeth and creates the necessary space for the bridge by cutting them.

A model of the tooth is then made in the bridge laboratory. Of course, temporary bridges are used for a while, so that if there is no problem, a permanent bridge can be placed in the next step, and permanent teeth will be implanted. The lifespan of bridges is about 5 to 15 years if oral hygiene is maintained.

The latest dental implant technology

In bridge implants, long-term use can be detrimental to the health of your mouth and teeth because the side teeth are shaved.

It is even possible to implant the teeth in this way, causing the side teeth to decay and this decay to reach the roots of the teeth. So in this method, the risk of gum disease is high.

Implant implantation can be a better option because of its longer lifespan and without damaging other teeth. If several teeth are lost together, the best way to implant a tooth is to use an implant, and using this method makes it easier to eat and chew. It can also be cost effective.

Implantation of teeth without implants

These days, the new method of dental implants without implants has received a lot of attention. Implant-free dental implants are performed by radiography using computer technology.

In this method, the structure of the jawbone is evaluated using three-dimensional imaging and the exact location of the tooth implant is determined.

This implant is usually more practical in people who have lost all their teeth. Implant-free dental implants with new technology compared to dental implants are such that all the benefits are preserved but the disadvantages of the implant are eliminated.

In this method, the tooth is replaced without puncturing the jawbone. Of course, it should be noted that the use of implanted teeth without implants is possible when the main tooth is still in place.

In this method, the existing main tooth is copied by 3D imaging and the tooth is placed in place without the use of a working drill.

To create more beauty, they use a veneer on the replacement teeth and adjacent teeth during the treatment. After 6 months, this temporary veneer is removed from the tooth and replaced with a permanent veneer.

Placing veneers in natural tooth implants

A veneer is actually a type of tooth restoration that is placed on the surface of the tooth and covers it. When implanting a tooth with an implant, the veneer is glued to the implant using tooth glue to hold the tooth in place.

The adhesive used in planting can be made of glass powder or synthetic resin. There is a type of these adhesives that are placed on the teeth with purple light and are activated in this way.

Implanting a tooth with glue is such that the glue maintains the veneer by creating the necessary resistance when pressure is applied, and in this way it does its job.

These adhesives are used in both chemical and non-chemical types to maintain the coating. Chemical adhesives have a higher strength and hold the coating in place with more strength.

But they are difficult to remove when we need to change the cover. It is best to use this adhesive when high strength is needed, such as in patients who gnash their teeth.

Implanting teeth with glue

Adhesives used in cheap dental implants are available in two types, temporary and permanent. After restoring the tooth until the main veneer is ready, dentists use a temporary veneer, at which time they use a temporary adhesive to attach the temporary veneer to make it easier to remove.

Temporary adhesives include zinc oxide-eugenol adhesive, which is made from zinc oxide powder, olive oil and eugenol. Permanent adhesive, which is better to call it semi-permanent, is used to attach a permanent veneer in dental implants.

These coatings are usually made of zinc phosphate, GI ionomer glass and modified glass ionomer. The diagnosis of which adhesive to use with which sex in dental implants is determined by the patient’s condition.

Occasionally there is a problem with caries under the veneer or eating hard foods or factors such as bruxism on the veneer.

In this case, you should see your doctor to repair it. The shelf life of coatings that are glued with permanent adhesives is between 8 to 10 years if the hygienic points are observed, and after that they need to be repaired or, better yet, replaced.

Costs related to dental implants

Perhaps one of the complaints that people have about going to the dentist and dental implants is in the area of ​​prices. The high cost of dentistry has prevented many people from undergoing annual dental examinations, which is why the rate of tooth decay and caries has increased.

The high cost of importing dental implants due to the rising price of the dollar has made treatment costly. The cost of dental implants is determined by the type of material used, the position of the tooth and the type of veneer used in it.

This fee is separate from the costs of photography, tooth decay and a visit to the dentist. For example, the cost of implanting a bridge tooth is determined by the materials used to make it.

The price of each tooth unit that is implanted by the bridge method is approximately 800,000 to 1,200,000 Tomans. For example, if you want to implant a bridge tooth on one of your teeth, you need two primary teeth and one middle tooth.

As a result, the final cost for planting it is about 2400000 to 3600000 Tomans. Of course, all these prices are limited and the costs should be estimated according to the diagnosis given by the dentist.

The cost of bridge implants

Regarding the price of implanting a single artificial tooth, it should be said that the cost of this type of tooth can also vary depending on the material and country of manufacture. The price of this type of planting is usually calculated on the basis of each unit.

For example, we can refer to the price of a single artificial tooth made in Korea, which costs about 4 million tomans per unit. Another case is the implantation of a single artificial tooth made in Switzerland, the approximate cost of which is 4,800,000 Tomans.

In another case, we can mention the price of dental implants without implants, which is expensive due to its up-to-dateness. In this method, as in other methods, the type of material selected is important.

Also, in this method, the possible costs that are caused by solving some dental problems such as gum infections should be considered. Sometimes, due to the low bone density at the site of the tooth placement, the doctor is forced to transplant the bone, which may increase costs.

In this method, due to the use of 3D imaging and the cost of these imaging, it is possible to increase the cost. Also, due to the complexity of the treatment process, the number of times you have to go to the doctor’s office and pay for the visit is higher than other methods.

All of these factors and costs have reduced the number of people who use this method for dental implants.